BDVPQ - 727102 1GL

  • MSDS: BDVPQ
  • Manufacturer: PRATT AND LAMBERT INC
  • Product Name: 727102 1GL
  • National Stock Number: 8010-00-292-1127
Product Identification

Product ID:727102 1GL
MSDS Date:01/01/1985
FSC:8010
NIIN:00-292-1127
MSDS Number: BDVPQ

Responsible Party
PRATT AND LAMBERT INC
16116 E 13TH ST
WICHITA, KS 67201
US

Emergency Phone: 716-873-6000 DOT EMER 8002553924

Info Phone: 316-733-1361

Cage: 61196

Contractor
PRATT AND LAMBERT INC
6027 CLEVELAND, OH 44101-1027 US

Telephone: 216-566-2902

Cage: 61196

Ingredients

ISOBUTYL ALCOHOL (SARA III)

CAS: 78-83-1

RTECS: NP9625000

Fraction By Weight: 15%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ZINC CHROMATE

CAS: 13530-65-9

RTECS: GB3290000

Fraction By Weight: <5%

OSHA PEL 0.1 MG/M3 (CRO3)

ACGIH TLV: 0.01MG/M3(CR)A1;9192


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: <5%

OSHA PEL 200 PPM; Z-2

ACGIH TLV: S, 50 PPM; 9394

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


MINERAL SPIRITS

CAS: 64475-85-0

RTECS: PY8240000

Fraction By Weight: <0.5%

ACGIH TLV: 500 PPM

Hazards

Effects of Overexposure:INHALATION-ANESTHETIC,IRRITATION OF RESPIRATORY
TRACT OR ACUTE NERVOUS SYSTEM DEPRESSION.

First Aid

First Aid:CONTACT-FLUSH SKIN AND EYES WITH WATER WHILE REMOVING
CONTAMINATED CLOTHING. INHALATION-REMOVE TO FRESH AIR. CALL
PHYSICIAN IF SYMPTOMS PERSIST.

Fire Fighting

Flash Point:44F 7C
Extinguishing Media:NFPA CLASS B EXTINGUISHER; POLYMER FOAM FOR LARGE
FIRES
Fire Fighting Procedures:SELF CONTAINED BREATHING APPARATUS SHOULD BE
AVAILABLE
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
BREATHING VAPORS VENTILATE AREA REMOVE WITH INERT ABSORBENT AND
NON-SPARKING TOOLS.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F STORE LARGE
QUANTITIES IN BUILDING DESIGNED TO COMPLY WITH OSHA 1910.106
Other Precautions:GROUND CONTAINERS WHEN POORING.AVOID FREE FALL OF
LIQUID IN XS OF FEW INCHES DO NOT FLAME CUT, BRAZE OR WELD COATED
MATERIAL WITHOUT BUR OF MINES APPROVED RESPIRATOR OR APPROPIATE
VENTILATION.

Exposure Controls

Respiratory Protection:OPEN AREA BUR MINES MECH RESPIRATOR-CLOSED-BUR
MINES CHEM/MECH FILTE
Ventilation:GENERAL DILUTION OR LOCAL EXHAUST TO KEEP TLV BELOW LIMIT
Protective Gloves:REG IF LONG CON
Eye Protection:TO PROTECT VS SPLASHING
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT TO
CONTAMINATED CLOTHING.
Supplemental Safety and Health

Chemical Properties

HCC:F2

Stability

Stability Indicator/Materials to Avoid:YES

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS-INCINERATE IN APPROVED FACILITY-DO NOT
INCINERATE CLOSED CONTAINERS

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.